Due to popular demands, we have worked with top HID light manufacturer and bring you the ultimate HID conversion kit.
Many so-called high quality HID light out there have these problems:
- flickering
- does not turn on every time
- turns on but shuts off after hours of operation and sometimes minuites
- burns out after only using it for few month
- color change and intensity change
- damages the electrical system in your car
Q: Why does these problems exist?
A: The biggest reason is that it’s actually technically very easy and cheap to make a ballast (controller) or the burner (the bulb), but it gets hard and expensive to make a good one that last a long time. For example, typical HID kit you buy in the market now uses simple low grade microprocessor with very simple firmware programming to control the turning on and maintaining a constant power. But these kits are only designed under the assumption that you are using constant power source. In a real environment, there are many factors you need to consider to ensure long term operation of the HID such as: temperature, supply voltage, supply current, is it switching type power source from the car, and even age of the bulb. Especially for newer cars, the light bulb in your car isn’t turned on simply by a relay anymore. There are actually dedicated ICs and drivers that powers and monitors the status of the light bulb. So when you install a HID kit to newer cars, the IC in the car is not driving a simple light bulb anymore, and that would create a lot of problems and cause malfunction.
A good HID kit would have many safety precaution designs such as under voltage/over voltage shut off, open/short circuit shut off, reverse voltage shut off, and constant current monitoring. Basically it would shut off when ever it sees any abnormal condition to prevent any damage to your beloved vehicle.
That’s why I have tried to find the safest and most reliable HID kit out there and bring them to you at the most affordable price I can. Here are just a few key difference:
- True wide voltage rating: 9V~32V (Its wide voltage makes it way more robust and can be used on big trucks with 24V system). Other HID kit are only rated at 9~16V.
- Super Slim style Ballast: make it much easier and when doing the installation.
- Fast turn on: these HID can be installed on high beams now and turns on faster than other HID kit on the market
- Safety function: Over/under voltage shut off, open/short circuit shut off, reverse voltage shut off, real time current monitoring. When the HID is rated at 35W each, it would run at 35W, not 37, nor 30. Giving you consistent intensity and prolongs the life of the burner.
- Dedicated German designed ASIC chip just to do all the work to ensure long term stability. (Typical microprocessors are just too slow to do all that.)
- 18 months replacement warranty from me!! (Not 3 month, 6 month, 12 month, or no warranty at all)
- Defective rate as low as 0.5%. Compare to typical 5% ~ 20%, and trust me, I have seen as high as 50% before.
Normally the HID kit with this kind of quality is retailed at $300~400 a kit. But I was able to work out a deal directly with the manufacturer and bring them to you starting from $239!!!!
There is more, during the promotion period, I would install on your car for FREE!!!! **(basic installation only)
Call Jordan now @ 604 7736035 if you would like to order the HID kit for your car.
High Quality Philips Patent HID Kit from Taichang: Regular Price $300/set
On Sale: $239/set with free installation & 18-month replacement warranty
