this is the latest retrofit we did using FX-R projector on 2010 brand new Nissan Altima. the new Altima uses materiel very close to epoxy to seal the headlight now so it was quite challenging taking about the headlight. So it was definitely not something you would want to try without prior retrofitting experience.
Since we are in canada, there is the DRL issue we need to address. Originally the DRL is running off the high beam, but our FX-R projector has very good high beam capability. Therefore, to have the FX-R high beam work properly we rerouted the DRL so it would run on the low beam HID. And when high beam is triggered, both the projector and original high beam will be on
We use Vantage Electronics HID kit to ensure long term usage without having flickering or premature bulb burn out problem. The bulb is using D2S style for ease of replacement in the future. Enjoy the picture, any comments are welcomed
June 24th, 2010 at 3:27 pm
Loving it, Jordan did a fantastic job on the retrofit and I would strongly recommend that y’all give him a buzz and get your projectors done!
If you are going for HID then go for the projectors else just stick to your halogen! ;)
Andy (owner of the vehicle)
June 24th, 2010 at 8:37 pm
[...] 2010 altima 2.5 sedan projector retrofit Hey y'all, just thought I'd share the pics with you lovely people. I like it, very stock looking. Click here for more picture [...]
March 29th, 2011 at 9:38 am
i have a 2010 altima 2.5s, just wanted to know how much you would charge to get my headlights retrofitted the way you have yours. let me know. thanks.